Improvement

• Optimized StaticFO: New config-file with enabled StaticFO-io configuration. #10440
  

Improvement

• ibaPADU-SCM: Optimized StaticFO: Config-files on board. #10348
  

Bugfixes

• ibaPADU-S-IT-2x16: Wrong internal version numbers. #10443
• ibaPADU-SCM: Sporadically wrong timebase instead of 1ms 20ms. #10402
  

New features

• ibaPADU-S-CM: StaticFO-Mode on S1=0. #5020, #8619
  

Improvement

• New MOQ-driver. #6067
• Organization of status and watchdog signals. #6225, #6278
• Locked parameters are grey in PDA IO-manager (read-only). #3437
• Web:
  • ibaPADU-S-IT-2x16: MAC address of RJ45-LAN port visible. #9996
  • ibaMS16xAI-20mA: "Impedance" corrected. #3716

Bugfixes

• ibaPADU-S-IT-2x16
  • WinCE7: No more communication over Fiber Opitc Flex-IP channel. #7842
  • Web: NTP-Serveraddress could only be IP. #5799
  • Web: Save backup not possible with Windows Internet Explorer 7. #5729
  • Reset to factory default doesn't delete DHCP. #5728
  • User "admin" SMB access rights incorrect. #5875
  • Update by PDA doesn't delete unziped files in "\hard disk\update". #5867
  • GenBackupSIT16: Hostname incorrect. #6379, #6380
  • SMB-access over FO not possible -> note in manual. #4257
  • L1 doesn't blink fast on autoupdate. # 5256
• Frequency measurement with sporadic errors. # 6136
• Web:
  • ibaPADU-S-IT-2x16: Change "software" to "firmeware". #6195
  • ibaMS4xAI-380VAC: Wrong picture, missing infos. #3370, #5798
  • ibaMS16xAI-24V: Process-IOs missing. #3297, #3717,#5323
  • ibaMS16xAO-20mA: "nominal output current" missing.#3718, #5320
  • ibaMS32xDI-24V: Error in info-register. #2938
  • ibaMS4xADIO: Missing infos. #5088, #5833
  • ibaMS8xAI-110VAC: Voltage description missing. #3329
  • ibaMS8xAI-110VAC: "Impedance" corrected. #3719
  • ibaMS8xICP: non-uniformed info-register. #3334
  • ibaMS16xDI-24V: Process-IOs missing. #2940, #3318
  • ibaMS16xDI-220V: Process-IOs missing. #2939, #3726
  • ibaMS4xUCO: Process-IOs missing. #3725, #3923
  • ibaMS16xAI-20mA: "Impedance" corrected. #3716
  • ibaMS32xDO-24V: Process-IOs incorrect. #5357, #9092
  
  

Bugfixes

• Calibration Data is not loaded after Auto update. #10549, #10556

Bugfixes

• Autoupdate doesn't work correctly. #10253
• New FPGA build52: PCIe errors. #10271

Improvement

• New FPGA: build50. #9221
  

Bugfixes

• Autoupdate keeps repeating when problematic module is plugged. #10112

New features

• New Head Station: ibaDAQ-S

Improvement

• ibaMS4xUCO: ibaLogic function to support UCO completely. #8533
  

Bugfixes

• ibaMS8xIEPE: Spikes because of timing problem on serial data communication. #8647
• ibaMS4xUCO
• Periode on 0 after timeout instead of max. value. #8643
• Wrong decoder file for "Hengstler_RC58-00xx-E-x.xx.SG-x.xml". #8560
  

Improvement

• Folder "hard disk\update" now deleted before update. #6381
• ibaMS4xUCO
• Open issues from UCO closed. #6146, #6147
• backward combatibility (signals names, etc.). #6409
• Encoder and mode settings have to be rereadable. #3617
• Take the given PDA-signalnames to ibaLogic image. #5569
• Setting of permanent signals names. #5501, #4036
  
• ibaMS8xIEPE
• Unique signal names. #6420, #6435
• Channel LED on status "shorted" should be different from other states. #6289
• New status signals. #3566
• New algorithm to calculate the frequency. #7814

Bugfixes

• PDA shows error after reconfiguration in ibaLogic. #6211
• ibaMS4xUCO
• "SetModuleConfigurationEx" deletes signal settings. #3736
• Error on actived PDA reseterror-signal. #6123
• Reset of error-signals without manuel reset. #6127
• Error statur on correct output signals. #6128
• Reset on N-signal doesn't could the following pulse. #7814
  
• ibaMS8xIEPE
• Missing module picture in PDA IO-Manager. #6150
• ibaMS3xAI-1A/100A: Switching effects between 1A and 100A range. #7775
• ibaMS32xDO-24V: Activated signals are inactiv. #8017

Improvement

• More resources for flex slow channel. #6332

Bugfixes

• TCP-Acknowledge has wrong checksum "FFFF". #6290

Bugfixes

• ETX-Boot error. #6333
• System hangs up after reboot sometimes. #6117, #6176, #6316
  
• Communication error. #6298
  

New features

• New Modules: ibaMS8xIEPE. #6149

Bugfixes

• Update process sometimes fails, because of unsuccessful cleanup of old data. #15021

Bugfixes

• Error message on PQEvents in delta grid. #13206
• Negative sequence unbalance constant zero. #13258

New features

• OS-Watchdog implemented in AVR-firmware. #9059, #12925
• Optional 3kHz low pass filter for analog inputs. #12036

Bugfixes

• Aktivated digital Filters on analog inputs. #12680

New features

• First certified PQ-Core --- IEC 61000-4-30 Ed.3 (2015) tested with IEC 62586-2 Ed.1 (2013).

New features

• Power and energy calculations for lines and complete grids. #6119, #6121, #6203, #6205
• Symmetrical components in 3 phase grids. #6155
• Flicker. #6309
• Interference factor (TIF, THFFm generic linear and generic square). #6224, #7643
• EN50160 calculations. #6155, #6309
• Calculation of U12, U23, U31 in star grid (out of U1, U2 and U3). #6121

Improvement

• Support units for input and output values, #6118
• Relative harmonic in percent i.s.o. factor, #6365
• Time synchronization of ibaPQU-S with ibaPDA time, #6084, #7930
• Phase range changed from 0 .. 2*PI to -PI .. PI, #6325

Bugfixes

• Phase difference between different modules compensated, #6311
• Solves firmware errors in specific configurations, #6109, #6265, #6312, #6352, #6382, #6389, #6399, #7832, #7862, #7973
• Communication problems, #6081, #6144, #6145, #6308, #6415, #6416, #7504
• Calculation errors, #5992, #6194, #6282, #6321, #6323, #6367, #6372
• Solves problems during and after update, #7562, #7966

Bugfixes

• Sporadic configuration errors "XML not complete". #6356

Bugfixes

• ETX-Boot error. #6333

First Release

• New Modules: ibaPQU-S. #5293

Bugfixes

• Different release versions on HW0 and HW1 modules. #12761

Bugfixes

• Version 1.6.4.3825 (Release Date 25. September 2018): Wrong CMU id is written in status file

Bugfixes

• Different release versions on HW0 and HW1 modules. #12761

Improvement

• Configuration file is growing. #12523
• Stopping Hainzl porcesses before updating. #12603
• Version 1.6.3.3579 (Release Date 23. April 2018): parameters in RTSCode.cnf are reduced. #12642
• Version 1.6.3.3579 (Release Date 23. April 2018): transmit TCP-Telegramm. #12642
• Version 1.6.3.3579 (Release Date 23. April 2018): set CMU-time with TCP-Telegramm. #12642
• Version 1.6.3.3579 (Release Date 23. April 2018): CMU-VISUALIZE. #12642
• Version 1.6.3.3579 (Release Date 23. April 2018): New CMU Phase-calculation(PhiSmax,PhiSppmax). #12642

Bugfixes

• Version 1.6.3.3579 (Release Date 23. April 2018): TCP-Telegramm. #12642

Improvement

• BiancaASI: WriteSignalNamesToModuleConfiguration() writes signal names back to configuration., #7765
• BiancaASI: Set sensitivity with module configuration., #7765
• Version 1.6.1.3271 (Release Date 9. June 2017): If NTP-Time server ist not available, Time set to last stored time stamp., #10224
• Version 1.6.1.3271 (Release Date 9. June 2017): CMU Visualization: device name is displayed., #10224

Bugfixes

• Version 1.6.1.3271 (Release Date 9. June 2017): Sensor Check: index error fixed in sensor defect parameterization., #10224

New features

• ibaPADU-S-IT-16: FTP-access for user "padu" to hdd2. #9165

Bugfixes

• ibaPADU-S-IT-16 & ibaCMU-S: Digital filter only on channels 0..3 accurate. #7685; #6459

Improvement

• ibaCMU-S & HAICMON CMU
• Lock-mechanism between application and PDA. #4251
• Access authorization standardized (FTP, Web, SMTP, Telnet). #5167; #5170; #5171; #5811; #5773; #4231, #3384
  

New features

• New Modules: ibaMS4xADIO. #5300
• Redesigned Modules: ibaMS3xAI-1A, ibaMS3xAI-5A, ibaMS3xAI-1A/100A, ibaMS8xAI-110VAC. #5612; #5346
• Digital antialiasingfilters for all current analog modules (ibaMS16xAI-#; ibaMS8xAI-110VAC; ibaMS4xAI-380VAC; ibaMS3xAI-#; ibaMS8xICP; ibaMS4xADIO). #5638

Improvement

• ibaPADU-S-IT-16 & ibaPADU-S-IT-2x16
• Lock-mechanism between application and PDA. #4251
  
• Access authorization standardized (FTP, Web, SMTP, Telnet). #5167; #5170; #5171; #5811; #5773; #4231, #3384
• Update-folder will be deleted when incorrect updates occur. #5777
  
• ibaPADU-S-IT-16: Overwrite attribute in Version.XML-file. #5179
• Web
• Cuttoff frequency of analog butterworth filter depends on module hardware release. #5629
• ibaMS32xDO-24V: Wrong properties left. #3709

Bugfixes

• ibaPADU-S-IT-2x16
• SIT-release playing on 2x16. #5733
• NTP supports no server hostname with fixed IP-address on 2x16. #5766
• Web: No reset note to reset device after update. #5787
• Restore: Loosing static default gateway and static WINS server settings to 0.0.0.0. #5807
  
• ibaPADU-S-IT-16: Factory default is not 192.168.11.64. #5731
  
• ibaMS32xDO-24V: Undervoltage monitoring switch off channel too early. #5405
• ibaMS16xAI-10V: Driver crashes by updating to v02.08.001. #5669
• ibaMS16xAI-24V: Missing driver for ibaPADU-S-IT-2x16 system. #5835
• ibaMS3xAI-1A/100A: 100A-range not calibrated, because driver doesn't support calibration factor less than 1. #5673; #5725
  
• ibaMS3xAI-1A/100A: interface errors with ibaLogic and application . #5860; #5861; #5862; #5863; 5866
  
• ibaMS8xAI-110VAC: Web: wrong description of "CAT II". #3273

New features

• New Head Station: ibaPADU-S-IT-2x16. #5651;
• ibaPADU-S-IT-2x16: Backup / Restore. #5527

Improvement

• ibaPADU-S-IT-2x16: Access authorisation optimized (FTP-access, new user). #5603, #5604

New features

• New Head Station: ibaCMU-S. #5611

Bugfixes

• ibaPADU-S-IT-16 & ibaPADU-S-CM: No compatibility for the new hardware generation of ibaPADU-S modules. #5808

Bugfixes

• Update of ibaPADU-S-CM was only possible from v02.06.001, but not from older versions. #5371

New features

• New Modules: ibaMS32xDO-24V, ibaMS16xDIO-24V, ibaMS16xAI-24V-HI_HW1. #4621; #4620; #5125
  
• New Modules (hardware redesign): ibaMS16xAI-10V_HW1, ibaMS16xAI-10V-HI_HW1, ibaMS16xAI-24V_HW1, ibaMS16xAI-20mA_HW1. #4137; #4139; #4140; #4138

Improvement

• ibaPADU-S-CM / ibaPADU-S-IT-16
• New SysClockInc-register in FPGA (address change). #5304; #5083
  
• New update routine
• Store only Golden- & User-FPGA and calibration files on MS-flashes, no more storage of driver and web files (new "\update_2" folder for ibaPADU-S-IT-16). #4684
• New ModulLoader instead of ModulManager. #5080
• ibaPADU-S-IT-16: Delete "hard disk\appication\driver\update" before firmware update / copy "harddisk\appication\driver\update" to "harddisk\appication\driver\update_2". #4043
  
• ibaPADU-S-CM: LED L1 behavior - no red, fast green blinking on programming. #3396; #3397
  
• ibaMS3xAI-1A/100A: Supports <calibration.xml_cal>. #4142
  
• ibaMS16xAO-10V / ibaMS16xAO-20mA
• New signal groups and ordering in PDA I/O-Manager. #4709; #5208; #5209
• Web picture adapted. #3918
• ibaMS16xDIO-24V
• Pulse width modulation to adapt channel LEDs brightness. #4649; #4717
• ibaMS16xDO-2A
• Web picture adapted. #3727; #3917
• ibaMS4xUCO
• Encounter files with version info. #4652; #4711
• Web picture adapted. #3922
• ibaMS8xICP
• Supports led flash for PaduFactory use. #4891
• Peak value in <FactoryDefault> corrected. #4163
• Supports digital antialiasing filter and digital user filter are no longer supported. #5205
• BiancaASI.dll
• Adaption to new modules for functions "GetModuleConfigurationEx()", "SetModuleConfigurationEx()". #5085
• Adaption to update, digital filters, frequency measurement, reset error signals for output modules. #5154
• Frequency measurement for alle AI16-MS. #4960
• ResetError signals (ibaMS16xDO-2A, ibaMS16xAO-10V, ibaMS16xAO-20mA, ibaMS4xUCO, ibaMS32xDO-24V). #4708
  

Bugfixes

• DUF-driver: Error with more than one output signal group per module. #5174
• ibaPADU-S-IT-16
• Hardware function test doesn't match with v02.07.001. #5220
• FO-driver: Wrong default value for Flex on loop-through. #5191
  
• Error in <FactoryDefault.xml> (ibaMS16xAI-24V; ibaMS4xAI-380VAC). #5162; #5161
• ibaMS16xAO-10V / ibaMS16xAO-20mA: Wrong value in "active" signals. #4754
• ibaMS16xDO-2A
• Description error in configuration file. #4029
• Error signals are pending to short to be recognized from ibaLogicV4. #3981
  

New features

• New Modules: ibaMS3xAI-1A, ibaMS3xAI-5A. #4596; #4522
• ibaPADU-S-IT-16 & ibaPADU-S-CM:"SetFlash" batch & shell to change SPI-flashes on new AI-modules. #4616
• ibaPADU-S-IT-16 Web: HW-Version in web-interface. #3449; #4638
  
• ibaPADU-S-CM
• Running LEDs for PaduFactory. #4579
• iptables. #4557
  

Improvement

• ibaPADU-S-IT-16
• Web: Write BIOS-time on pushing "Set Method"-button. #4775
  
• Web: Browser refresh (F5) doesn't start update / PMAC again. #3103; #4569; #4635
  
• L1 (run) blinks fast on (auto-)update. #3395; #3413
  
• BiancaASI.dll: limitation to 1024 buffer. #3515
• LED-control faster. #4514
• PDA: global hw-version of diagnose sheet should be "--". #4647
• Network share will be stored for OEMs before update/ reset to factory default. #4592
• ibaPADU-S-CM: Storing the configuration from pda in background to speed up the response time. #4670
  
• ibaMS3xAI-1A/100A Web: correction. #4637
• SystemInfo.XML shows serial number always with 6 digits. #3710

Bugfixes

• ibaPADU-S-IT-16
• Function ReadFilterConfiguration() crashes when global properties are missing. #3446
• Some errors in <ForDuf.xml> (Module4InvalidOutput, comment on AnalogIn, parametre baseaddress). #3949
• PMAC error "system boot failed" respectively PMAC crash. #4157
• BiancaASI.dll: signal groups without direction. #4472
• Incorrect output data when SysCLK < FO-Clk. #4546
• <ibaFiles.dll>: pInfoValue-pointer is not initialized. #4598
• ibaPADU-S-CM
• No data after reboot on systems with hugh configurations. #4243
• Crash during start up by checking a not existent FPGA bit. #4559; #4562
• Wrong calculation of digital filters in asynchronous mode (ibaMS16xAI-10V; ibaMS16xAI-10V-HI; ibaMS16xAI-24V; ibaMS16xAI-20mA; ibaMS8xAI-110VAC; ibaMS4xAI-380VAC; ibaMS3xAI-1A/100A; ibaMS8xICP). #4162
• DUF start problems on non existend modules. #4242
• ibaMS3xAI-1A/100A, ibaMS4xAI-380VAC, ibaMS8xAI-110VAC: Wrong frequency measurement using slow sample rates. #4808
• ibaMS4xUCO
• Wrong sensor files (pulldown resistors). #3594
• Missing lines "CheckSum" & "FileVersion" in PDA interface. #4633

New features

• ibaPADU-S-IT-16: Activation/deactivation of telnet and ftp service via webinterface.  #4511

New features

• ibaMS3xAI-1A/100A, ibaMS4xAI-380VAC, ibaMS8xAI-110VAC: grid frequency measurement reffered to DIN EN 61000-4-30 (from ibaPDA-V6.30.0). #4332
• ibaPADU-S-IT-16: System clock is written to BIOS-clock. #4339

Improvement

• ibaPDS: Shows diagnosis information of ibaPADU-S-IT-16 & ibaPADU-S-CM. #3271
• DFD: Limited file size for received files. #3951
• ibaMSxx: Digital filter settings still there after ibaPDA-V6 configuration. #4425
• ibaMS8xICP: calibration of input channels. #4247
• ibaMS8xAI-110VAC: on high frequency channel-LEDs are no longer off. #3528
• ibaMS3xAI-1A/100A
• switching of the combined range signals is at 6.25A. #3377
• changed signal names (dc range). #3378
• no combined range neither 1.56A-range using ibaLogic-V4. #3737

Bugfixes

• ibaPADU-S-IT-16 & ibaPADU-S-CM: Error on BPBM. After configuration data transfer will not be established.  #4333; #4254
• Missing load of FPGAs of output modules after softreboot. #2959
• Reset of older module doesn't work on updating the system. #4100
• ibaPADU-S-IT-16
• No default subnet-mask after aborted user input. #3376
• Driver crashes when PDA sets to factory default. #4357
• No input data using ibaNet750-BM. #4449
• No DigOuts on X5 using four ibaMS4xUCO on one system. #4377
• ibaMS3xAI-1A/100A: Wrong signal user text. #3721; #4160
• ibaPADU-S-CM: ibaNet-Flex communication interrupts on high data transfer: #4510

Bugfixes

• ibaPADU-S-IT-16 & ibaPADU-S-CM: Error on BPBM. After configuration data transfer will not be established. #4333
• ibaPADU-S-CM:Memory Leak. #4428

Bugfixes

• ibaPADU-S-IT-16: Error on ethernet communication. After a while the communication interrupts and the SIT freezes. #4239

New features

• New Module: ibaMS4xUCO. #3387
• ibaPADU-S-CM: DevMsgService only for PaduFactory. #3660
• ibaPADU-S-IT-16 New Features
• SmartImageDownload <ILUS.exe>. #3282
• <NK.bin> with 512MB RAM. #3791
• DatFileWrite-license update from 256 to 512 channels, #4017
• Web: unknown modules are marked red. #2902
• check HW-Version at update process. #3439

Improvement

• ibaPADU-S-CM: Autoupdate lets L1 blink only orange. #3313
• ibaPADU-S-IT-16 improvements
• default fiber optic setting is "external". #3946
• reset user LEDs on startup. #3380
• Web: Unknown modules shall be marked in web interface, #2902
• Web: wrong picture (ibaMS16xAO-10V; ibaMS16xAO-20mA). #2956; #2957
• ibaMS8xICP: channel numbers with two digits. #3327
• ibaMSxx: digital filters for analog input modules. #3269

Bugfixes

• Softreset of modules do not work (ibaMS16xAO-10V; ibaMS16xAO-20mA; ibaMS16xDO-2A; ibaMS4xAI-380VAC). #3807; #3816; #3759; #3758; #3757
• ibaPADU-S-CM bugfixes
• <calibration.bin> is not used. I/O modules are uncalibrated (ibaMS16xAI-10V; ibaMS16xAI-10V-HI; ibaMS16xAI-20mA; ibaMS16xAI-24V; ibaMS8xAI-110VAC). #4155
• Reboot of SCM doesn't reboot the AVRs of the I/O modules. #3045
• In case of error and abbord the measurement mode will not be closed. #3800
• ibaPADU-S-IT-16 bugfixes:
• doubled values using buffered mode with ibaLogicV4. #4174
• "admin" is not allowed to access \\[sit-hostname]\RAMDisk, only "padu". #3864
• licences are deleted after reset to default settings. #3401; #3779
• red module LED blinking 16 times after calling "ModulReset.exe". #3532
• Startup.exe - detect last line even w/o line feed. #3556
• Update deletes user setting. #4089; #3030; #2877
• "unused" respectively "sig_disabled"-signals are shown in ibaLogicV4. #3941: #3559
• deletes all module configurations by reseting SIT to default settings. #3780; #3914
• ibaMS16xDO-2A bugfixes
• AutoUpdate only matches with another plugged i/o-module. #3082
• Image download not possible with two connected modules. #3420

Bugfixes

• ibaPADU-S-IT-16 & ibaPADU-S-CM: Error on BPBM. After configuration data transfer will not be established. #4333
• ibaPADU-S-CM:Memory Leak. #4428

Bugfixes

• ibaPADU-S-IT-16: Error on ethernet communication. After a while the communication interrupts and the SIT freezes. #4239

New features

• New Module: ibaMS16xAO-20mA. [ibaMS4xUCO included, but not tested #3387] #3389
• PaduFactory: entire integration of production, calibration and funktion test from module ibaMS4xAI-380VAC. #3659

Bugfixes

• ibaPADU-S-CM: No resumption auf data recording after loss of power. #3715
• ibaMS4xAI-380VAC: timing error with digital filters. #3504

Bugfixes

• No calibration of analog MS modules with ibaPADU-S-CM (ibaMS16xAI-10V; ibaMS16xAI-10V-HI; ibaMS16xAI-24V; ibaMS16xAI-20mA; ibaMS8xAI-110VAC; ibaMS4xAI-380VAC). #3354

New features

• common release for SIT+MS & SCM+MS
• New Head Station: ibaPADU-S-CM
• New Modules: ibaMS4xAI-380VAC; ibaMS16xAI-10V-HI; ibaMS16xAI-24V
• 32Mbit Flex protocol #2882
• AutoUpdate: PADU-S Modules whose FW-version don't match the head module compatibility list will be automatically updated respectively downgraded to the head module "overall release version". #2875; #2891
• Digital Filters for all current analog modules currently only internal function, not implemented in ibaLogic-V4 / ibaPDA-V6 (ibaMS16xAI-10V; ibaMS16xAI-10V-HI; ibaMS16xAI-24V; ibaMS16xAI-20mA; ibaMS8xAI-110VAC; ibaMS4xAI-380VAC; ibaMS3xAI-1A/100A; ibaMS8xICP). #3269
• ibaMS8xICP: New FPGA with synchonous interface #3062; #3063

Improvement

• Automatically reboot after update. #2922; #2903
• No reboot while AutoUpdate. #3184
• Add "overall release version" to <[system].xml>. #2899
• Reset all modules by AVR-Reset after any update. #3081
• Any update caused by user is executed completely to all modules independent from the current module version ("update -force"). #3097
• ibaMS8xICP: Update didn't work because of old FPGA-Versions. #3073
• Omit firmware compatibility check on soft reset. #3051
• ibaPADU-S-IT improvements
• name of ibaLogicV4-module in PDAv6 should be changed to "ibaLogicxxx". #3278
• start threats modification. #3094
• Information of "locked module" and " signal description" added to the module XML-Configuration. #2955
• No update of <System.ini>. #3090
• Reset after update by UpdateManager. #3080
• Splitting the signal names in name and description. #2910
• Hex-switch and push button are not longer input signals for LogicV4. #3052
• FO-configuration by setting Hex-switch. #2882
• Resetting the whole PADU-S modular system to "FactoryDefault" by Hex-switch "69" (S1="6"; S2="9") with the exception of the sit "device name" and the licensing . #2877
• Update process: User-LEDs blink fast during the update. At the start of the update the current module FW-version is read out of the EEPROM and set to "XX". On the end it's set to the new version. #2889
• B.ASI: Copy <BiancaASI.dll> to folder "\windows" at startup. #3099
• B.ASI: SystemInfo Function in <BiancaASI.dll>. #3163
• B.ASI: <BiancaASI.dll> function "SetModuleConfiguration" should set errors. #3207
• B.ASI: "Overall release version" in <BiancaASI.dll>. #2876
• Lv4: Yellow led signals running ibaLogicV4-image while no present image on SIT. #3130
• Lv4: No ibaLogicV4-signals will be present in PDAv6, if "FiberOptic_IO" of ibaLogicV4 is set to "real". #3144
• Lv4: ibaLogicV4 is terminated by update process. #2933
• Web: <Event.log> added to webinterface. #3068; #3071
• Web: "filter" sheets from analog modules removed. #2895
• Web: Logic-Update no longer merged to "update" sheet but in "ibaLogic". #2890
• Web: New pictures for all current PADU-S modules. #1878; #2753; #2927
• Web: Wrong descriptions of ibaMS8xAI-110VAC. #3273
• Web: Format adaption of filter description. #3274

Bugfixes

• New hardware version ("A1") of backplane bus: ibaPADU-S-B4S. #3183
• ibaPADU-S-IT bugfixes
• <BiancaASI.dll> generates invalid XML-files. #3257
• Closing ibaPDA kills all network connections. #3096
• hex switch changes are only detected after boot. #2932; #2958; #3041
• Update-files from ibaLogic update are stored to the global release update folder and deletes the release files. #2892
• Solved random system overload issue (resolved hotfix). #3084
• "SwitchLogicApp" deleted the whole folder, not only the current layout. #2861
• PMAC doesn't start with current ibaLogic-Image. #2867
• ibaLogicV4: Null Value of signals configured in "buffered mode". #2897
• Web: wrong channel / module descriptions (ibaMS16xAI-20mA #2941; ibaPADU-S-IT-16 #2937; ibaMS16xAI-10V #2935; ibaMS3AI-1A/100A #2896)
• Web: "padu" user is allowed to change passwords. #3070; #3268
• Web: wrong error messages in sheet "update". #3281
• ibaPADU-S-CM bugfixes
• Wrong IP-adress in ibaNet 32Mbit Flex. #3175

Improvement

• Fiber-Optic-Driver now only reads Flex-settings when Flex is active. #3091

Bugfixes

• Hotfix: Solved random system overload issue. #3084
• <update.exe> supports parameter "-force" otherwise there's an error by downgrading to older releases. #3098

New features

• PADU-S Modules whose FW-version don't match the SIT-compatibility list will be automatically updated respectively downgraded to the global update package, stored on the CF on the sit. #2875

Improvement

• The name of the 3xAI-1A/100A module has changed from "ibaMS3xAI-1A-100A (2xADC)" to "ibaMS3xAI-1A/100A". The module configurations are converted to the renamed device. #2885
• FactoryDefault IP-adresse for the ethernet interface is 192.168.1.1. #2874
• New pictures for all current PADU-S modules. #2753
• Web: non tunable configuration for fiber optic "Flex" ("Enable DHCP", "Default Gateway") are removed. #2879
• <BiancaAsi.dll> shows the current release version. #2876
• Resetting the whole PADU-S modular system to "FactoryDefault" by Hex-switch "69" (S1="6"; S2="9") with the exception of the sit "device name" and the licensing . #2877
• Web: new tab "firmware" for the current release version. #2881
• ibaLogic blocks the configurations of the fiber optic and all other modules. Therefore it doesn't matter in which order the system will be configured. #2884
• Update process: User-LEDs blink fast during the update. At the start of the update the current module FW-version is read out of the EEPROM and set to "XX". On the end it's set to the new version. #2889

Bugfixes

• "SwitchLogicApp" deleted the whole folder, not only the current layout. #2861
• "SwitchLogicApp" are not started from the <start.txt>. #2862
• "AddPlatformDevices.exe" are not started from the <start.txt>. #2863
• No changes to the <startlogic.txt> by updates. #2866
• Web: description of "persistant image" (tab "ibaLogic") is not up to date. #2864

First Release

Changes

• No functional change - change in assembly to minimize voltage in standby

Changes

• First release after redesign of pcb (A3)

Changes

• No functional change - replacement of obsolete component

Changes

• Redesign of pcb

Changes

• Change in assembly to stabilize run-up

Changes

• Change of components

Changes

• New device

Changes

• No functional change - SSD with a new firmware

Changes

• No functional change - change in fixing one of the connectors

Changes

• No functional change - different assembly of SSD

Changes

• No functional change - new type of SSD

Changes

• No functional change - improvement of housing

Changes

• New device

Changes

• No functional change - new provider for pcb

Changes

• No functional change - new provider for pcb, additional option for buffering of clock and loop of fibre optic

Changes

• No functional change - adaption to iba's fixed BIOS

Changes

• Change of connector - now live-working device can be removed

Changes

• Improvement of production

Changes

• No functional change - improvement of housing

Changes

• No functional change - improvement of housing

Changes

• No functional change - improvement of layout for better assembly

Changes

• No functional change - replacement of obsolete component

Changes

• No functional change - replacement of obsolete component

Changes

• No functional change - unused connectors are no more assembled

Changes

• Improvement of assembly for a steady electromagnetic shielding

Changes

• Change of connector - now live-working device can be removed

Changes

• New device

Changes

• No functional change - SSD with a new firmware

Changes

• No functional change - change in fixing one of the connectors

Changes

• No functional change - different assembly of SSD

Changes

• No functional change - improvement of layout for better assembly

Changes

• Change of connector - mechanical change of housing

Changes

• New device

Changes

• No functional change - SSD with a new firmware

Changes

• No functional change - change in fixing one of the connectors

Changes

• No functional change - different assembly of SSD

Changes

• No functional change - cahnge of SSD

Changes

• New device

Changes

• No functional change - change of housing, side walls made of synthetic material

Changes

• No functional change - change of components for better assembly

Changes

• Mechanical change of housing

Changes

• Complete Redesign

Changes

• No functional change - change of housing, side walls made of synthetic material

Changes

• No functional change - change of components for better assembly

Changes

• Mechanical change of housing

Changes

• Complete Redesign

Changes

• No functional change - change of housing, side walls made of synthetic material

Changes

• Mechanical change of housing
• No functional change - change of components for better assembly

Changes

• Complete Redesign

Changes

• No functional change - change of housing, side walls made of synthetic material

Changes

• No functional change - change of components for better assembly

Changes

• New device

Changes

• No functional change - change of housing, side walls made of synthetic material

Changes

• No functional change - change of components for better assembly

Changes

• Mechanical change of housing

Changes

• No functional change - components were changed
• Signals (range 9,8-10V) could sometimes lead to a misrepresentation of information

Changes

• Complete Redesign

Changes

• No functional change - change of housing, side walls made of synthetic material

Changes

• Complete Redesign

Changes

• No functional change - mechanical change of housing

Changes

• New device

Changes

• No functional change - new supplier of pcb

Changes

• No functional change - new housing

Changes

• To be prepared for future functionality some values were adapted

Changes

• Complete Redesign

Changes

• No functional change - new supplier of pcb

Changes

• No functional change - new housing

Changes

• To be prepared for future functionality some values were adapted

Changes

• Complete Redesign

Changes

• No functional change - use of alternative components

Changes

• No functional change - modified housing, LEDs have changed places

Changes

• No functional change - new supplier of pcb

Changes

• Complete Redesign

Changes

• No functional change - replacement of obsolete component

Changes

• Calibration optimized

Changes

• No functional change - mechanical change of housing

Changes

• Change of connector - now live-working device can be removed

Changes

• Change of assembly for better calibration

Changes

• Additional change of assembly for only one module (SN 000109)

Changes

• No functional change - redesign of layout to adopt manual changes

Changes

• New device

Changes

• New device

Changes

• No functional change - mechanical change of housing

Changes

• Change of connector - now live-working device can be removed

Changes

• No functional change - Change of housing, protective earth conductor

Changes

• Redesign of printed circuit board to implement manual changes into layout
• Change of assembly to accelerate rising edge

Changes

• New device

Changes

• No functional change - mechanical change of housing

Changes

• No functional change - unused connector was removed

Changes

• Change of connector - now live-working device can be removed

Changes

• New device

Changes

• No functional change - mechanical change of housing

Changes

• Ajustment of signal threshold to avoid wrong pulses

Changes

• Change of connector - now live-working device can be removed

Changes

• No functional change - Change of housing, protective earth conductor

Changes

• Redesign of printed circuit board to implement manual changes into layout
• Change of assembly to accelerate rising edge

Changes

• New device

Changes

• No functional change - mechanical change of housing

Changes

• No functional change - change of components to improve production

Changes

• Change of components for better performance

Changes

• New device

Changes

• No functional change - mechanical change of housing

Changes

• New device

Changes

• New device

Changes

• No functional change - change of assembly for more accuracy

Changes

• No functional change - change of assembly for more accuracy

Changes

• Change of assembly in connection with calibration

Changes

• New device

Changes

• No functional change - change of assembly for more accuracy

Changes

• No functional change - change of assembly for more accuracy

Changes

• Change of assembly in connection with calibration

Changes

• New device

Changes

• No functional change - mechanical change of housing

Changes

• Change of supplier for printed circuit board

Changes

• New device

Changes

• No functional change - mechanical change of housing

Changes

• New device