ibaPDA - PDA2025-10

Informazioni sul prodotto

ibaPDA version v8.11.4

For using ibaPDA v8.11.x you need an ibaPDA license with a valid EUP date of 2025‑06‑26 or later.

What’s new in this version?

Important improvements and bugfixes

Support added for firmware v8.3 of S7 410-5H CPUs
IEC 61850 MMS connections were not automatically reestablished when no datasets were used.
Initial tag values in OPC UA client were sometimes not properly set.
In the Generic UDP interface it was not possible to address data at an offset greater than 4095.

Registered users can download this new version in our download area.

For our products ibaPDA-Request-S7-DP/PN/ibaNet-E (31.001310) and ibaPDA-Request-S7-UDP (31.001311) we have released the following new library versions:

ibaPDA-Request-S7 Library for TIA-Portal v2 2025-08-01 (ibaS7LibTIA_V2 20250801) (TIA Portal V16, V17, V18, V19 and V20 supported)

New S7 request block (ibaREQSym_6PN) introduced supporting up to 6 PROFINET slots in a single ibaPDA module.

ibaPDA-Request-S7 Library for TIA-Portal v3 2025-08-01 (ibaS7LibTIA_V3 20250801) (TIA Portal V19 and V20 supported)

New S7 request block (ibaREQSym_6PN) introduced supporting up to 6 PROFINET slots in a single ibaPDA module.

New S7 request block family (ibaREQ3sym) introduced, supporting ibaNet-E, UDP and PROFINET as data paths.
With this set of blocks the performance footprint on S7 CPUs is reduced, in case of using ibaNet-E as data path with multiple images per frame.

The new GSDML file GSDML-V2.42-ibaBM-PN-20250401.xml supports a new slot size of 230 bytes which fits best in case using the new request block ibaREQSym_6PN.

Registered users can download these new versions from our website.